Sump Pump Installation & Repair in Burbank & LA
Keep the lowest point of your house dry.
Basements, crawl spaces, and low-lying yards collect water — and water always wins if it has nowhere to go. We install, replace, and repair sump pumps, sized to your pit and your water table.
Sump pump snapshot
Protecting the low spots:
- New installations — pit, pump, and discharge line done right
- Pump replacement — matched to your pit and lift height
- Float & switch repair — the usual culprit when a pump won’t kick on
- Backup pump options — ask about protection when the power drops
Sump pump services
The right pump, in the right pit, moving water away from your house.
New sump pump installation
Low spot collecting water? We set the pit, install the pump, and run the discharge line well away from the foundation.
Pump replacement
Old pump died during heavy rain? We swap in a replacement matched to your pit and the height it has to lift — not a one-size guess.
Float & switch service
Pump has power but won’t kick on — nine times out of ten it’s the float or the switch. A small fix that saves the big one.
Discharge line work
Clogged, frozen, or broken discharge lines send water right back. We clear, repair, or reroute them properly.
Backup pump options
Pumps need power, and bad weather can take it out. Ask us about backup options during the estimate so one outage doesn’t undo everything.
Maintenance & testing
A pump nobody checks is a pump that fails in February. We test and service them before the rainy season hits.
What goes wrong
Three things worth knowing before the rain comes.
Plan for the worst weather
Pumps need electricity, and bad weather can knock it out. Talk to us about backup options during the estimate — one outage shouldn’t flood the basement.
Sized to your water table
An undersized pump runs forever and still loses. We size the pump to the pit and the water coming in — enough, with margin.
Test before the rain
Sump pumps sit silent for months, then get asked to save the house overnight. A yearly test catches the dead ones early.
Areas we serve
Sump pump service across Los Angeles and the San Fernando Valley — call to confirm your address.
How it works
Free estimate, flat rate, dry basement.
Free estimate
We look at the pit, the water source, and where the discharge needs to go — then quote a flat per-job rate you approve first.
Install or repair
New pit and pump, or a straight swap of the failed unit. Discharge routed away from the house, not next to it.
Tested under load
We run the pump and watch a full cycle before we leave. It works when we go — that’s the deal.
Sump pump FAQ
What people ask before the rain comes.
How do I know my sump pump is failing?
It runs constantly, cycles on and off rapidly, makes grinding noises, or doesn’t kick on when the pit fills. If it’s over 7 years old, don’t wait for the next heavy rain to find out — call (818) 669-9019 and we’ll test it.
What size pump do I need?
It depends on the pit, the inflow, and how high the water has to lift. We size it during the free estimate — no guessing, no oversized bills.
Do I need a battery backup?
If your area loses power in bad weather, it’s cheap insurance. Ask about backup options and we’ll lay out what fits your setup.
How much does a sump pump install cost?
Pit condition, pump size, and discharge routing all factor in. Free estimate, flat per-job price agreed before work starts — never hourly.
Water where it shouldn’t be? Call now.
24/7 emergency service · Free estimates · Flat per-job pricing